Description

60mm x 60mm x 8mm Galvanised Steel Angle Iron

Our 60mm x 60mm x 8mm Galvanised Steel Angle Iron is a strong and versatile structural mild steel angle protected by a hot-dip galvanised zinc coating.

Its L-shaped profile provides strength and rigidity in two directions, making it suitable for frames, brackets, supports, reinforcement, gates, fencing and general fabrication.

The galvanised coating provides improved resistance to rust and atmospheric corrosion. Products are available cut to your required length, helping reduce material waste and preparation time.

Technical Specifications

Key Features

• Hot-dip galvanised zinc coating for improved corrosion resistance
• Strong L-shaped structural profile
• Equal legs measuring 60mm x 60mm
• 8mm nominal material thickness
• Suitable for cutting, drilling and general fabrication
• Approximately 8 mm galvanising process hole where required
• Available cut to your required length

Benefits

• Improved corrosion protection compared with untreated mild steel
• Reduced maintenance in exposed environments
• Strong and versatile profile for frames, supports and reinforcement
• Suitable for both indoor and outdoor fabrication
• Flat external faces provide practical fixing and joining surfaces
• Cut-to-length ordering helps reduce material waste and preparation time
• Available in equal and unequal leg sizes across the wider range

Structural Grade Information

Galvanised Steel Angle Iron is normally supplied in S275JR structural steel to BS EN 10025-2.

Selected items may be supplied in S355JR structural steel to BS EN 10025-2, where applicable depending on section size, supplier and current stock availability. This does not mean that every angle size is available in both grades.

The galvanised coating is separate from the underlying steel grade. Where applicable to the supplied product, hot-dip galvanising is carried out in accordance with BS EN ISO 1461:2022.

If your project requires a specific material grade, including S275JR or S355JR, certification or material traceability, please contact KI Metals before placing your order and obtain written confirmation from KI Metals.

Telephone or verbal discussions, customer order notes, notes included with drawings, and other instructions submitted with an order do not constitute confirmation of the material grade. A specific grade, certification or traceability is only confirmed where KI Metals has provided written confirmation before the order is placed.

Where a guaranteed material grade, certification or traceability is required, KI Metals may need to source suitable material specifically against the customer’s written requirements.

Manufacturing Process

Galvanised Steel Angle Iron is manufactured using recognised structural steel production methods appropriate to the section size and current mill production.

The manufacturing process may vary depending on the section size, supplier, stock availability and production requirements while continuing to meet the applicable product standards.

If your project requires a specific manufacturing process, please contact KI Metals before ordering and obtain written confirmation from KI Metals. Telephone or verbal discussions, order notes and notes included with drawings do not constitute confirmation of manufacturing requirements.

Galvanising Process and Cut-End Protection

Galvanised Steel Angle Iron is normally cut to the required length before being sent for hot-dip galvanising. Each pre-cut length will usually include an approximately 8 mm process hole where required so that the material can be safely handled and suspended during the galvanising process.

The position of the process hole may vary according to the angle size and galvanising requirements. This is a normal production feature and is not a product defect.

In some cases, the material may be galvanised in full lengths and cut afterwards to avoid unnecessary process holes in smaller finished pieces. Where this method is used, the exposed cut ends are protected with a suitable zinc-rich cold galvanising spray.

If zinc-rich cold galvanising spray is not permitted for your project, or you require the cut ends to be hot-dip galvanised, please contact KI Metals before placing your order. We can review your cutting and galvanising requirements and confirm the most suitable production method.

Surface Condition

Galvanised Steel Angle Iron is supplied with a protective hot-dip galvanised zinc coating. The appearance of the finish may vary between individual pieces and production batches.

Normal characteristics can include differences in colour or brightness, visible zinc spangle, drainage marks or runs, handling and storage marks, small areas of surface roughness, and variations around edges, corners and process holes. These cosmetic variations are normal features of hot-dip galvanised steel and do not necessarily indicate a fault with the product or coating.

Corrosion Protection

The hot-dip galvanised zinc coating forms a protective barrier over the steel and provides improved resistance to atmospheric corrosion compared with untreated mild steel.

The service life of the coating depends on the environment, exposure conditions, moisture or chemical contact, installation, maintenance and any subsequent cutting, drilling, grinding or welding. Areas exposed or damaged after delivery through further fabrication should be protected with a suitable zinc-rich repair coating where continued corrosion resistance is required.

Typical Applications

• Frames and structural supports
• Gates and fencing
• Brackets and mounting supports
• Corner reinforcement
• Agricultural buildings and equipment
• Shelving and storage racks
• Trailer and vehicle fabrication
• Platforms and walkways
• Garden structures
• Machinery supports and guards
• Building and construction projects
• General engineering, maintenance and fabrication

Suitability for any load-bearing or safety-critical application should be confirmed by a suitably qualified engineer.

Custom Cut to Your Required Length

Enter your required measurement in the Length box before adding the product to your basket. We will cut the material to your specified length with a cutting tolerance of ±3 mm. The ordered quantity refers to the number of individual cut lengths required.

Customise Your Product

Depending on the selected product and available services, you may be able to add drilling instructions, upload a hand sketch or engineering drawing, request additional fabrication, or select available finishing options. Please provide clear measurements and instructions when ordering customised work.

Also Known As

• Galvanised Angle Iron
• Galvanised Steel Angle
• Galvanised Mild Steel Angle
• Galvanised L Section
• Galvanised L Angle
• Galvanised Equal Angle
• Galvanised Unequal Angle
• Zinc-Coated Steel Angle

Can Galvanised Steel Angle Iron Be Welded?

Galvanised steel can be welded, but it should not be welded in the same way as untreated mild steel without appropriate preparation. The zinc coating should be removed from the immediate weld area before welding.

Heating zinc can produce hazardous zinc oxide fumes, so suitable ventilation, local fume extraction and appropriate personal protective equipment must be used. After welding, the affected area should be cleaned and treated with a suitable zinc-rich repair coating where continued corrosion protection is required.

KI Metals does not recommend welding galvanised products without the correct equipment, preparation, training and safety controls.

Frequently Asked Questions

Why is there an 8 mm hole in the angle iron?

An approximately 8 mm process hole may be required so that each pre-cut length can be safely handled and suspended during hot-dip galvanising. This is a normal production feature and is not a product defect.

For some cutting requirements, the material may instead be galvanised in full lengths and cut afterwards, helping avoid a process hole in each smaller finished piece. Any exposed cut ends are then protected with zinc-rich cold galvanising spray.

If this repair method is not acceptable for your application, please contact KI Metals before ordering so that alternative galvanising arrangements can be discussed.

What do the three measurements mean?

For this product, 60mm x 60mm x 8mm refers to the nominal length of each leg followed by the nominal material thickness.

Can Galvanised Steel Angle Iron be used outdoors?

Yes. The zinc coating provides improved resistance to atmospheric corrosion, making the product suitable for many outdoor applications. Its service life will depend on the environment, installation and maintenance.

Can it be cut to my required length?

Yes. Enter your required length on the product page before adding the item to your basket. We will cut it within our stated tolerance of ±3 mm.

Will every piece have the same appearance?

Not necessarily. Variations in colour, brightness, zinc spangle and surface texture are normal characteristics of hot-dip galvanised steel.

Can Galvanised Steel Angle Iron be drilled?

Yes. It is suitable for drilling and general fabrication using appropriate tools and working methods. Newly exposed steel around drilled holes may require additional corrosion protection.

Can it be painted?

Yes, but the galvanised surface must be cleaned and prepared correctly. Use primers and paint systems specifically suitable for galvanised steel.

Is the material rustproof?

Galvanising provides significantly improved corrosion resistance, but it does not make the steel completely immune to corrosion. Service life depends on exposure conditions, coating condition, fabrication and maintenance.

What should I do if my project requires a specific steel grade?

Galvanised Steel Angle Iron is normally supplied in S275JR structural steel to BS EN 10025-2. Selected items may be supplied in S355JR structural steel to BS EN 10025-2 where applicable, depending on section size, supplier and stock availability.

If a particular grade, certification or traceability is required, please contact KI Metals before ordering and obtain written confirmation from KI Metals. Telephone or verbal discussions, order notes and notes included with drawings do not constitute confirmation of supply requirements.

Safety Notice

This product is supplied as cut and is not deburred. Cut ends and edges may be sharp. Wear suitable protective gloves and appropriate personal protective equipment during handling, fabrication and installation.

Take particular care when cutting, grinding or drilling galvanised steel. Use suitable extraction and respiratory protection where dust or fumes may be generated.

Welding galvanised steel can produce hazardous zinc oxide fumes. The zinc coating must be appropriately removed from the weld area, and suitable ventilation, fume extraction and personal protective equipment must be used.