Description
42mm Mild Steel Round Bar
The 42mm Mild Steel Round Bar is solid round steel bar supplied cut to length.
It is available cut to your required length for fabrication, engineering and project use. Please review the grade, finish and suitability information below before ordering.
Technical Specifications
| Material | Low-carbon or free-cutting steel, depending on the supplied grade |
|---|---|
| Product family | Mild Steel Round Bar |
| Material grade | May be supplied as S275JR hot-rolled structural steel, 070M20 low-carbon engineering steel, 080A15 bright-drawn low-carbon steel, EN1A / 230M07 non-leaded free-cutting steel or EN1A Pb / 230M07Pb leaded free-cutting steel, depending on diameter and current stock availability. |
| Applicable standard | Varies with the supplied grade; no particular standard is guaranteed unless confirmed in writing before ordering |
| Finish | May be supplied with a black, hot-rolled, as-rolled, peeled, turned or bright surface condition depending on diameter, grade and stock availability. |
| Cutting service | Cut to your required length |
| Standard cutting tolerance | ±3 mm |
| Edge condition | Supplied as-cut and not deburred |
Key Features
- Solid round profile
- Available cut to your required length
- Suitable for fabrication using an appropriate process
- Useful for professional, trade and general engineering work
Benefits
- Cut-to-length ordering can reduce preparation time and waste
- Versatile material for fabrication and engineering
- UK delivery options from KI Metals
Material Grade Information
This product may be supplied in different material grades depending on the selected diameter and current stock availability.
Where applicable, the material supplied may be:
- S275JR structural steel to BS EN 10025-2
- 070M20 low-carbon engineering steel
- 080A15 bright-drawn low-carbon steel, traditionally known as EN3B
- EN1A / 230M07 non-leaded free-cutting steel
- EN1A Pb / 230M07Pb leaded free-cutting steel
The material may have a black, hot-rolled, as-rolled, peeled, turned or bright surface condition depending on its diameter, grade and available stock. “Bright” describes the material’s surface or manufacturing condition; it is not a material grade.
The listed grades are not technically equivalent and may differ in strength, machinability, weldability and suitability for particular applications.
Unless KI Metals provides written confirmation before ordering, this product is sold by its stated shape and dimensions. No particular material grade, mechanical property, surface condition, certification or traceability is guaranteed.
If a specific grade, standard, finish, certification, traceability or mechanical property is required, please contact KI Metals before placing your order and obtain written confirmation by email.
Telephone conversations, verbal discussions, customer order notes and drawing notes do not constitute written confirmation from KI Metals.
Surface Condition
May be supplied with a black, hot-rolled, as-rolled, peeled, turned or bright surface condition depending on diameter, grade and stock availability.
Normal production, storage, handling and cutting variations are not automatically evidence of a product defect. If appearance is critical, contact KI Metals before ordering.
Typical Applications
- Pins
- Supports
- Fabrication
- General Engineering
Design and Suitability
Product selection must not be based on dimensions alone. The required grade, loading, environment, connections, fabrication process and installation method should be specified or checked by a suitably qualified person where applicable.
KI Metals supplies material to the dimensions ordered but does not determine whether a particular item is suitable for the intended load, environment or application.
Cut to Your Required Length
Enter your required measurement in the Length box before adding the product to your basket. Material is cut to the ordered length with a standard cutting tolerance of ±3 mm.
Products are supplied as-cut and are not deburred. Contact KI Metals before ordering if a tighter tolerance, specific end preparation or additional processing is required.
Customise Your Product
Depending on the selected product, size and current service availability, you can use the Optional Extras menu to add drilling requirements, upload a hand sketch or engineering drawing, and choose from the surface-finishing options currently available.
KI Metals also plans to introduce powder coating and red oxide primer as additional customisation options in the future.
Only services displayed and selected through the product customisation menu, or separately confirmed in writing by KI Metals before ordering, form part of the order.
Also Known As
- Mild Steel Round Bar
- Solid Steel Round Bar
- Solid Mild Steel Rod
Fabrication and Safety
Use tools, procedures and personal protective equipment suitable for the material, grade, finish and intended process. Control sharp swarf, cut edges, scale, dust and fumes.
Welding, heating, drilling, grinding, machining and forming requirements depend on the confirmed grade and intended service. Use a suitable qualified procedure where the work is structural or safety-critical.
Frequently Asked Questions
Is a particular material grade guaranteed?
Only where KI Metals confirms the required grade in writing before the order is placed. Order notes, drawing notes and verbal discussions are not confirmation.
Can I request a grade or certificate in the order notes?
You may provide information in the order notes, but an order note does not constitute confirmation. Contact KI Metals before ordering and obtain written confirmation.
Can this item be cut to my required length?
Yes. Enter the required measurement in the Length box before adding the product to your basket. The standard cutting tolerance is ±3 mm unless confirmed otherwise.
Are the cut ends deburred?
No. This product is supplied as-cut and is not deburred. Cut ends and edges may be sharp and may contain burrs or loose swarf. Handle with care and use suitable protective equipment.
Can I add drilling or a surface finish?
Where available for the selected product and size, use the Optional Extras menu to choose the services currently offered. Powder coating and red oxide primer are planned future options and are not included unless displayed and selected, or confirmed separately in writing by KI Metals before ordering.
Is the material suitable for my project?
The customer is responsible for confirming material grade, dimensions, loading, environment, fabrication method and regulatory requirements. Structural or safety-critical selection should be checked by a suitably qualified person.
Safety Notice
This product is supplied as-cut and is not deburred. Cut edges may be sharp. Wear suitable protective gloves during handling, fabrication and installation.
Cut ends may also contain burrs or loose swarf. Do not run bare hands along cut edges. Use suitable eye protection and other appropriate personal protective equipment, and deburr or otherwise make exposed cut edges safe where required for the intended use.
Ensure the product is correctly supported and secured during unloading, storage, lifting, fabrication, transport and installation.
Reviews
There are no reviews yet.