Description

12mm Custom Cut & Bent Rebar – Code-32

The 12mm Custom Cut & Bent Rebar – Code-32 is reinforcement bar cut and bent to the selected shape code and dimensions.

It is manufactured to the selected shape code, bar diameter and dimensions. Review all configuration details before ordering.

Technical Specifications

Material	Weldable reinforcing steel
Product family	Custom Cut and Bent Rebar
Material grade	B500B weldable reinforcing steel.
Applicable standard	BS 4449:2005+A3:2016; scheduling, cutting and bending to BS 8666:2020
Finish	Ribbed reinforcing-steel finish with normal oxidation.
Ordering method	Configured by shape code, bar diameter, dimensions and quantity
Dimensional responsibility	The customer must check all submitted reinforcement details before ordering

Key Features

• Made to the selected shape code and dimensions
• Ribbed reinforcing-steel profile
• Suitable for reinforcement schedules prepared by the project designer

Benefits

• Manufactured to the selected shape code and dimensions
• Suitable for scheduled reinforcement orders
• Clear grade and ordering requirements

Material Grade Information

This product is supplied as B500B weldable reinforcing steel.

The grade information shown is general supply information and does not guarantee that a particular grade, certificate or traceability will be supplied for an individual order.

If a particular material grade, certification or traceability is essential, please contact KI Metals before placing your order and obtain written confirmation from KI Metals.

Telephone conversations, verbal discussions, customer order notes, drawing notes and other instructions submitted with an order do not constitute written confirmation of material grade or certification requirements.

Important: Cut and bent reinforcement is manufactured to the shape code and dimensions selected or submitted with the order. The customer is responsible for checking all dimensions, bend details, bar diameters and quantities before ordering.

Surface Condition

Ribbed reinforcing-steel finish with normal oxidation.

Normal production, storage, handling and cutting variations are not automatically evidence of a product defect. If appearance is critical, contact KI Metals before ordering.

Typical Applications

• Reinforcement Cages
• Foundations
• Beams
• Structural Concrete

Design and Suitability

Product selection must not be based on dimensions alone. The required grade, loading, environment, connections, fabrication process and installation method should be specified or checked by a suitably qualified person where applicable.

KI Metals supplies material to the dimensions ordered but does not determine whether a particular item is suitable for the intended load, environment or application.

Ordering Cut and Bent Reinforcement

Select or provide the required shape code, bar diameter, dimensions and quantity. These details must agree with the reinforcement schedule prepared for the project.

Cut and bent reinforcement is manufactured to the submitted configuration. Contact KI Metals before ordering if any dimension, bend detail or scheduling requirement is unclear.

Also Known As

• Cut And Bent Rebar
• Shape-Code Reinforcement
• Bent Reinforcement Bar

Fabrication and Safety

Reinforcement must be cut, bent, fixed and installed to the approved design and applicable project requirements. Unauthorised heating, welding, re-bending or modification can affect its performance.

Any welding or special processing must be supported by a suitable procedure for the confirmed reinforcement grade and checked by the responsible designer where required.

Frequently Asked Questions

Is a particular material grade guaranteed?

Only where KI Metals confirms the required grade in writing before the order is placed. Order notes, drawing notes and verbal discussions are not confirmation.

Can I request a grade or certificate in the order notes?

You may provide information in the order notes, but an order note does not constitute confirmation. Contact KI Metals before ordering and obtain written confirmation.

Is this ordered using a single cut-length box?

No. It is configured using the required shape code, bar diameter, dimensions and quantity.

How do I specify the required bent bar?

Select or provide the required shape code, bar diameter, dimensions and quantity. These details must match the reinforcement schedule prepared for the project.

Can KI Metals determine the reinforcement design?

No. Reinforcement design, concrete cover, lap lengths, anchorage and structural suitability must be specified or checked by the project engineer or designer.

Is the material suitable for my project?

The customer is responsible for confirming material grade, dimensions, loading, environment, fabrication method and regulatory requirements. Structural or safety-critical selection should be checked by a suitably qualified person.

Safety Notice

Wear suitable gloves, eye protection and other appropriate personal protective equipment. Ensure the product is correctly supported and secured during storage, lifting, cutting, fabrication, transport and installation.